The transformer connected by Scott is usually composed of two single-phase transformers.Connecting the end of a transformer's high-voltage winding to the center of another high-voltage winding can form a three-phase high-voltage winding with a T-shaped structure.Each low-voltage winding is a simple single-phase winding with no electrical connection between them.Their voltage and current are the same as those of ordinary single-phase transformers.But the winding and current of each high-voltage group are different from those of ordinary single-phase transformers.

　　Every part and port of a transformer needs to be wired,and various wiring methods and techniques have an impact on the operation of the transformer itself.Once the transformer's wiring is connected incorrectly,it will affect the effectiveness of using the transformer and pose a safety hazard,resulting in unimaginable consequences.The fundamental safety of transformers and the operation of wiring must be approached with utmost caution,with correct and standardized operation being essential

　　Technical parameters:

　　Exterior structure:Vertical

　　Cooling method:natural cooling

　　Moisture proof method:open type

　　Number of windings:Double winding

　　Iron core structure:shell type

　　Cooling method:dry type

　　Iron core shape:EI type

　　Number of power phases:Three phase

　　Frequency characteristics:low frequency

　　Model:SDG-100/0.38

　　Application scope:Special